概述
The IDT F1150 dual channel device is designed to operate with a single 5V supply. It is optimized for operation in a Multi-mode, Multi-carrier BaseStation Receiver for RF bands from 1700 - 2200 MHz with High Side Injection. IF frequencies from 50 to 450 MHz are supported. Nominally, the device offers +40 dBm Output IP3 with 335 mA of ICC. Alternately one can adjust 4 resistor values and a toggle pin to run the device in low current mode with +36 dBm Output IP3 and 235 mA of ICC.
A member of IDT’s Zero-Distortion™ family, this RF to IF mixer reduces distortion for improved SNR while simultaneously reducing power consumption.
概述
The IDT F1150 dual channel device is designed to operate with a single 5V supply. It is optimized for operation in a Multi-mode, Multi-carrier BaseStation Receiver for RF bands from 1700 - 2200 MHz with High Side Injection. IF frequencies from 50 to 450 MHz are supported. Nominally, the device offers +40 dBm Output IP3 with 335 mA of ICC. Alternately one can adjust 4 resistor values and a toggle pin to run the device in low current mode with +36 dBm Output IP3 and 235 mA of ICC.
A member of IDT’s Zero-Distortion™ family, this RF to IF mixer reduces distortion for improved SNR while simultaneously reducing power consumption.
F1150 系列参数
| 属性 | 参数值 |
|---|---|
| Package | VFQFPN |
| Input Freq Mhz | 2200-1700 |
| Output Freq Mhz | 450-50 |
| Supply Voltage | 5.25-4.75 |
| Lead Count | 36 |
| Lo Injection Side | High |
| Output Ip3 | 40 |
| Gain | 8.5 |
F1150NBGI8 型号参数
| 属性 | 参数值 |
|---|---|
| Package | VFQFPN |
| Lead Count | 36 |
| Carrier Type | Reel |
| Moisture Sensitivity Level | 1 |
| Qty. per Reel | 2500 |
| Qty. per Carrier | 0 |
| Pb (Lead) Free | Yes |
| Pb Free Category | e3 Sn |
| Temp. Rang | -40℃~+85℃ |
| Class | PLASTIC |
| Pkg. Code | NBG36 |
| Package Description | VFQFPN 6.00x6.00x0.80 mm 0.50mm Pitch |
| Length | 6 |
| Width | 6 |
| Thickness | 0.75 |
| Tape Pocket Pitch (mm) | 8 |
| Pkg. Category | G |
| Peak Reflow Temp (C) | 260 |
| Moisture Exposure Floor Life | Unlimited@<30C/85%RH |
| Moisture Sensitivity Bake (hrs) | 0 |
| Tape Pin 1 Quad | 1 |
