描述：
Regulated, Compact Power Supply
Regulated, Compact Power Supply
收藏 加入监控 添加到BOM
图片仅供参考，请查阅数据手册
生命周期：量产
概述
The UltraVolt V series offers seven models ranging from 600 to 3000 VDC of maximum high voltage power. They are available in either single-output positive or negative polarities. The V series modules deliver up to 1 W of power from a 5, 12, 15, or 24 VDC input. Protection against reversed input polarity, short circuits, and arcing is standard. With a footprint under 1 in² (6.45 cm²), these modules are perfect for applications with limited board space.
特性
- Small-footprint, lightweight, PCB-mountable package
- Wide selection of input and output voltage configurations
- Low output ripple, temperature coefficient, and line regulation (Analog interface with integral voltage control and voltage/current monitors)
- Integrated reverse polarity, short-circuit/arc, and overcurrent protection
- Meet product packaging requirements
- Design power subsystems around product needs — not high voltage module constraints
- Achieve higher precision than proportional-control high voltage supplies
- Enhance application performance through responsive control of high voltage output
- Increase power subsystem robustness and reliability
概述
The UltraVolt V series offers seven models ranging from 600 to 3000 VDC of maximum high voltage power. They are available in either single-output positive or negative polarities. The V series modules deliver up to 1 W of power from a 5, 12, 15, or 24 VDC input. Protection against reversed input polarity, short circuits, and arcing is standard. With a footprint under 1 in² (6.45 cm²), these modules are perfect for applications with limited board space.
特性
- Small-footprint, lightweight, PCB-mountable package
- Wide selection of input and output voltage configurations
- Low output ripple, temperature coefficient, and line regulation (Analog interface with integral voltage control and voltage/current monitors)
- Integrated reverse polarity, short-circuit/arc, and overcurrent protection
- Meet product packaging requirements
- Design power subsystems around product needs — not high voltage module constraints
- Achieve higher precision than proportional-control high voltage supplies
- Enhance application performance through responsive control of high voltage output
- Increase power subsystem robustness and reliability
0.6V12-N0.5 型号参数
| 属性 | 参数值 |
|---|---|
| 输出功率（瓦） | 0.5~1 |
| 长度（英寸） | 1.81 |
| 宽度（英寸） | 0.47 |
| 高度（英寸） | 0.98 |
| 安装类型 | Through Hole, Surface Mount |
| 最小输出电流 (A) | 0.000167 |
| 最大输出电流 (A) | 0.00167 |
| 输出电压范围 (V) | 0~3000 |
| 最小输出功率（瓦） | 0.5 |
| 最大输出功率（瓦） | 0.5 |
| Minimum Input Voltage (V) | 5 |
| 最大输入电压 (V) | 24 |
| 控制类型 | Analog |
| 最大输出电压 (V) | 600 |
| 输出数量 | 1 |
| 波纹（ppm） | 100 |
| 温度系数 | 100 |
| 输出类型 | Unipolar |
