概述
The F1130 RF front-end offers a 19dB gain with 3.5dB NF and +37dBm OIP3 performance. The digital step attenuator provides a 30dB adjustment range in 2dB steps via the SPI interface controller. For strong signal conditions, each RF amplifier can be bypass-controlled via the SPI interface. The RF front-end output and mixer input signals are bonded to separate pins to allow interstage image-reject filtering.
Each of the dual mixer paths provides a 9dB power gain, 10.3dB NF, and +36dBm OIP3 performance. An external LO signal is applied to the mixer LO port. This device is packaged in a 7mm × 7mm 48-VFQFPN with 50Ω single-ended RF and LO inputs, and 200Ω differential IF output impedance for ease of integration.
特性
- Dual path for MIMO systems
- RF: 400MHz to 1100MHz
- LO: 500MHz to 1300MHz
- IF: 25MHz to 400MHz
- Bypassable RF amplifiers for strong signal conditions
- 19dB RF front-end power gain
- +37dBm RF front-end OIP3 (Bypass OFF)
- +43dBm RF front-end OIP3 (Bypass ON)
- 3.5dB front-end NF at 900MHz
- 9dB mixer power gain (HS LO)
- +36dBm mixer OIP3
- 30dB gain control range, 2dB steps
- Total ICC = 360mA
- 7mm × 7mm 48-VFQFPN package
概述
The F1130 RF front-end offers a 19dB gain with 3.5dB NF and +37dBm OIP3 performance. The digital step attenuator provides a 30dB adjustment range in 2dB steps via the SPI interface controller. For strong signal conditions, each RF amplifier can be bypass-controlled via the SPI interface. The RF front-end output and mixer input signals are bonded to separate pins to allow interstage image-reject filtering.
Each of the dual mixer paths provides a 9dB power gain, 10.3dB NF, and +36dBm OIP3 performance. An external LO signal is applied to the mixer LO port. This device is packaged in a 7mm × 7mm 48-VFQFPN with 50Ω single-ended RF and LO inputs, and 200Ω differential IF output impedance for ease of integration.
特性
- Dual path for MIMO systems
- RF: 400MHz to 1100MHz
- LO: 500MHz to 1300MHz
- IF: 25MHz to 400MHz
- Bypassable RF amplifiers for strong signal conditions
- 19dB RF front-end power gain
- +37dBm RF front-end OIP3 (Bypass OFF)
- +43dBm RF front-end OIP3 (Bypass ON)
- 3.5dB front-end NF at 900MHz
- 9dB mixer power gain (HS LO)
- +36dBm mixer OIP3
- 30dB gain control range, 2dB steps
- Total ICC = 360mA
- 7mm × 7mm 48-VFQFPN package
F1130 系列参数
| 属性 | 参数值 |
|---|---|
| Package | VFQFPN |
| Input Freq Mhz | 1100-400 |
| Output Freq Mhz | 400-25 |
| Supply Voltage | 5.25-4.75 |
| Lead Count | 48 |
| Lo Injection Side | High or Low |
| Output Ip3 | 36 |
F1130NBGI 型号参数
| 属性 | 参数值 |
|---|---|
| Package | VFQFPN |
| Lead Count | 48 |
| Carrier Type | Tray |
| Moisture Sensitivity Level | 1 |
| Qty. per Reel | 0 |
| Qty. per Carrier | 260 |
| Pb (Lead) Free | Yes |
| Pb Free Category | e3 Sn |
| Temp. Rang | -40℃~+85℃ |
| Class | PLASTIC |
| Pkg. Code | NBG48 |
| Package Description | VFQFPN 7.00x7.00x0.80 mm 0.50mm Pitch |
| Length | 7 |
| Width | 7 |
| Thickness | 0.8 |
| Pkg. Category | G |
| Peak Reflow Temp (C) | 260 |
| Moisture Exposure Floor Life | Unlimited@<30C/85%RH |
| Moisture Sensitivity Bake (hrs) | 0 |
| Tape Pin 1 Quad | 0 |
